The maximum rotational speed is limited by the encoder's response frequency, but the speed range can be further increased by reducing the encoder resolution.
|Input power(Driver input)||DCV||24(※1)/48|
|Peak torque at stall||Nm||1.0||2.2||3.1|
|Continuous rated torque||Nm||0.36||0.66||1.00|
|Peak power rate||kW/s||24||83||147|
|Peak armature current||Arms||10||10||10|
|Rated armature current(※3)||Arms||2.8||3.0||3.5|
|Line armature resistance(at25℃)||Ω||4.0||4.0||3.6|
|Line armature inductance||mH||3.9||4.6||4.4|
|Max encoder resolution(※4)||P/R||Incremental：2,592,000
|Moment of inertia J||g･cm^2||0.60||0.77||0.94|
|Permissible radial load Fr||N||500|
|Permissible axial load Fa||N||250|
|Repeated positioning accuracy at shuttling||Pulse||±1|
|Applicable motor driver||MC-200-7220▢/MC-200C-6018▢|
|Standard heat sink||225×225×10 Alminum|
|CN1 cable(4.2)1M-TE||Between power and driver(1m)|
|CN2 bent cable(4.2)0.7M||Motor cable：Extension between motor and driver (Total1m)|
|CN2 bent cable(4.2)2.7M||Motor cable：Extension between Motor and Driver(Total3m)|
|CN2 bent cable (4.2)4.7M||Motor cable：Extension between motor and driver(Total5m)|
|CN3 bent cable(4.2)0.7M||Encoder cable : Extension between motor and driver(Total1m)|
|CN3 bent cable(4.2)2.7M||Encoder cable : Extension between motor and driver(Total3m)|
|CN3 bent cable(4.2)4.7M||Encoder cable : Extension between motor and driver(Total5m)|
|CN5 cable||USB2.0 cable with ferrite core : between PC and driver|
In the event of a failure due to our responsibility, we can repair and replace the product for free within the warranty period.
However, The warranty is by the product,so expenses with parts replacement and compensation for damages(etc) is out of the application of our warranty.
As a result of inspection, if it is found that the product is not a malfunction but handling or an external influence, you will be charged even during the warranty period.
Within 1 year after the start of use (however, within 1.5 years after delivery).
Click here for Inquiries
9:00 am to 5:30 pm.